Unlike countries such as Turkey, oxidant is produced in Iran with atmospheric stainless steel mixers. Due to the unique properties of oxidant, it is necessary for all mixer parts to be made of 316L stainless steel. Also, due to the injection of hydrogen peroxide below the liquid surface and the concentration of the emulsion, a very special type of mixer blades must be used. In addition, the welding and polishing steps of the internal and external surfaces of the mixer and the final acid washing have specific implementation details. If the principles of mechanical engineering and metallurgical engineering are not observed, the final product will become bulky and inflated in a short time and the product bottles will be returned to the manufacturers from the store shelves.
The largest oxidant producers in Iran, in addition to the atmospheric mixer for oxidant production, also use a homogenizer pump manufactured by Arkan Metals Company to achieve a uniform texture and increase the production speed.
General product specifications
- Three walls (maximum steam pressure that can be injected into the jacket) 1.5 bar
- Rock wool thermal insulation between the second and third walls
- With gearbox motor
- With shaft and stirring blades for making oxidant
- With manhole
- With valve for injecting hydrogen peroxide under the surface of the material
- With a temperature display sensor and a digital temperature display
- With 4 legs with limited adjustment capability to neutralize the slope of the hall floor
- With an inlet at the top of the jacket and an outlet at the bottom of the jacket
- All parts in contact with the material are made of 316 stainless steel and other parts are made of 304 stainless steel