Shampoo mixers in Iran are often made in an atmospheric form because the few bubbles suspended in the final product can be eliminated by giving it a rest time.
This type of mixer is often considered the simplest type of mixer, but if we consider two important factors in design, namely optimal batch time and uniform mixing, the need for engineering design in the type of blades, type and number of baffles, geometric shape of the mixer, rotational and linear speed of the agitator, as well as the power of the electromotor and the type of gearbox becomes important.
Arkan Fez Company, with its appropriate engineering knowledge, has performed all the above-mentioned calculations with the relevant software and has provided mixers with minimal batch time to its customers (such as Firuz Company).
In addition to observing the above, design and engineering calculations for the required steel sheet thickness, type and engineering specifications of welding and welding inspection methods, equipment life, etc. are carried out at Arkan Fez Company with relevant engineering software for shampoo mixers, and the relevant calculation booklet can be provided in accordance with the regulations of the American Society of Mechanical Engineers (ASME).
Using the RS series homogenizer pump (manufactured by Arkan Fez Company) for rapid homogenization of the product, especially after adding thickening agents, is a perfect solution for producing an ideal product in the shortest possible time.
General product specifications
- All stainless steel
- Has a motorized electric motor and gearbox with appropriate speed
- Has a bearing mechanism for the agitator shaft according to the design of the German company Chroma
- The type of blades is two-tiered according to the Best Practice design of the German company BASF, which significantly reduces the production time of each batch
- Has a manhole for easy washing
- Has a four-legged stand with adjustment capabilities
- Has a baffle according to the design of the German company IKA
- Has a side glass with a light along with an internal ladder and an electrical panel with an inverter and CIP balls and connecting pipes and a drain valve
- Parts in contact with the material are all made of 316 stainless steel
- Three-walled, with the second wall for heating and the third wall to prevent energy loss and operator safety
- Maximum pressure tolerable in the second wall is 2 bar